If you like to rev up your front and rear speakers, the M FOUR will be exactly the right "tool" to do so. With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp will heat up your voice coils in no time despite its super-compact dimensions. On the other hand the M FOUR stays totally cool thanks to the highly efficient Class D design topology. 3-channel or 2-channel configurations are possible as well, delivering up to 2 x 200 Watts RMS of clean and undistorted output power.
Needless to say that the M FOUR is equipped with a bunch of intelligent attributes like "start-stop capability" and our proprietary "ADEP" highlevel input so that it easily deals with all installation challenges of modern cars. Finally the extensive audio features will offer a sound quality at its best.
| Output power RMS ≤ 1% THD+N |
|
| - @ 4 Ohms |
4 x 100 Watts |
| - @ 2 Ohms |
4 x 100 Watts |
| - @ 1 Ohm |
- |
| - bridged @ 4 Ohms |
2 x 200 Watts |
| - bridged @ 2 Ohms |
- |
| Max. output power per channel* |
Up to 135 Watts RMS @ 4 / 2 Ohms |
| Amplifier technology |
Class D |
| Inputs |
4 x RCA / Cinch
4 x Highlevel speaker input
1 x Remote In |
| Input sensitivity |
RCA / Cinch 0.5 - 6 Volts
Highlevel 1.3 - 13 Volts |
| Input impedance RCA / Cinch |
20 kOhms |
| Input impedance highlevel |
9 - 33 Ohms |
| Outputs |
4 x Speaker output |
| Output voltage RCA / Cinch |
- |
| Signal converter for digital input |
- |
| Frequency response |
10 Hz - 30,000 Hz |
| Bass boost |
- |
| Highpass |
15 Hz - 4,000 Hz adjustable |
| Lowpass |
40 Hz - 4,000 Hz adjustable |
| Bandpass |
15 Hz - 4,000 Hz adjustable |
| Subsonic |
- |
| Phase |
- |
| Slope high- / lowpass |
12 dB/Oct. |
| Slope subsonic / lowpass |
- |
| Signal-to-noise ratio digital input |
- |
| Signal-to-noise ratio analog input |
98 dB (A-weighted) |
| Distortion (THD) |
0.05 % |
| Damping factor |
100 |
| Operating voltage |
10.5 - 16 Volts (max. 5 sec. down to 6 Volts) |
| Idle current |
1,100 mA |
| Operating temperature range |
-40° C to +70° C |
| Fuse |
2 x 30 A Maxi-fuse (APX) |
| Power rating |
DC 12 V ⎓ 45 A max. |
| Additional features |
Active, adjustable crossover, input mode switch, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP) |
| Dimensions (H x W x D) |
50 x 230 x 154 mm /
2.00 x 9.06 x 6.06” |
* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)