Small, efficient and uncompromisingly stable – the M ONE is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel.
In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.
| Output power RMS ≤ 1% THD+N |
|
| - @ 4 Ohms |
1 x 240 Watts |
| - @ 2 Ohms |
1 x 410 Watts |
| - @ 1 Ohm |
1 x 600 Watts |
| - bridged @ 4 Ohms |
- |
| - bridged @ 2 Ohms |
- |
| Max. output power per channel* |
Up to 720 Watts RMS @ 1 Ohm |
| Amplifier technology |
Class D |
| Inputs |
2 x RCA / Cinch
2 x Highlevel speaker input
1 x Remote In
1 x Remote control input |
| Input sensitivity |
RCA / Cinch 0.5 - 6 Volts
Highlevel 1.1 - 13 Volts |
| Input impedance RCA / Cinch |
20 kOhms |
| Input impedance highlevel |
13 Ohms |
| Outputs |
1 x Speaker output |
| Output voltage RCA / Cinch |
- |
| Signal converter for digital input |
- |
| Frequency response |
10 Hz - 250 Hz |
| Bass boost |
0 - 12 dB / 25 - 75 Hz |
| Highpass |
- |
| Lowpass |
50 Hz - 250 Hz adjustable |
| Bandpass |
10 Hz - 250 Hz adjustable |
| Subsonic |
10 Hz - 50 Hz adjustable |
| Phase |
0 - 180° adjustable |
| Slope high- / lowpass |
- |
| Slope subsonic / lowpass |
12 / 24 dB/Oct. |
| Signal-to-noise ratio digital input |
- |
| Signal-to-noise ratio analog input |
95 dB (A-weighted) |
| Distortion (THD) |
0.20 % |
| Damping factor |
100 |
| Operating voltage |
10.5 - 16 Volts (max. 5 sec. down to 6 Volts) |
| Idle current |
650 mA |
| Operating temperature range |
-40° C to +70° C |
| Fuse |
2 x 35 A Maxi-fuse (APX) |
| Additional features |
Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control |
| Dimensions (H x W x D) |
50 x 230 x 154 mm /
2.00 x 9.06 x 6.06” |
* In typical applications as subwoofer amplifier
HELIX-M-ONE